line up Cold Drawn Steel Tube Alloy Steel Tube

Alloy Steel Tube

Alloy Steel Tube

Feature

We can draw alloy steel tube with high accuracy. The thickness of alloy steel tube could be 36% in our factory.

  1. We can draw alloy steel tube to both very thin tube and very thick tube.
  2. Super thick tube could be:
    thickness(t)/outer diameter(D)=36%
  3. Process cost of cold drawn steel tube is superior to that of cutting and drilling worked steel tube.

Material

  • Mn (1.6% or less)
  • Cr (5% or less)
  • Cr-Mo (5%Cr-0.5%Mo or less)
  • Ni (4% or less)
  • Mn-Mo-V (1.8%Mn-2.2%Mo-0.8%V or less)
  • others

Processable size

Outer diameter : 16.0mm, Thickness : 5.5mm
- Outer diameter : 45.0mm, Thickness : 11.3mm

We always do our best for your requirement.


Usage and delivery record

  1. Alloy steel tube for piping (STPA12 - STPA25)
  2. Alloy steel tube for boiler and heat exchanger (STBA12 - STBA25)
  3. Nickel alloy steel tube for low temperature (STPL380, STPL450, STBL380, STBL450)
  4. Steel tube for drilling (bore rod etc.)
  5. Various automobile parts, mission turbine shaft (SCR440H), piston pin (SCM415) etc.


Contact us!